Rubber Processing Oil

Our Rubber Processing Oil products are of great quality and are Developed taking in to consideration the usage and product requirement.
Rubber Processing Oils are used during the mixture of rubber compounds. Rubber can be synthetic or natural and are used in the manufacturing of rubber products ranging from small rubber bands to huge vehicle tires.

Depending on the physical arrangement of the carbons atoms, Rubber processing oil are broadly classified in to three major groups namely;
Paraffinic: these are used extensively in EPDM, Butyl rubbers.
Naphthenic: Ideal for moulded articles, slippers, LPG tubes, floor tiles, etc. Aromatics: Mostly used to manufacture Tires, calendared and moulded sheets, Tread rubber etc


Uses / Applications

  • Used during the process of manufactruring rubber products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives, sealants, polishes and carbon black
  • To improve physical properties of vulcanization to reduce the cost of finished rubber compounds
  • Tyre, Rubber and Dhoop Industry.
  • Used as a Lubricant in Rubber Processing.
  • Used in manufacturing of White Oil. Used as a component in Ink Production.

TEST METHOD UNIT RMG SPEC ISO 8217 - 10 RESULT
Ash Content ASTM D482 - 07 % m Max 0.100 0.007
Pour Point ASTM D87 - 11 °C Max 30 -3
Carbon Residue ASTM D180 -06 %m Max 18.0 2.73
Flash Point ASTM D93-12 °C Min 60 142
Density @ 15°C ASTM D4052 - 11 kg/l Max 0.991 0.9895
Sulphur Content ASTM D4294 - 10 %m 3.54
Viscosity,Kinematic @ 50°C ASTM D445-12 mm2/s Max 380 254.9
Water Content ASTM D95-05 % vol Max 0.50 0.10
Total Sediment Potential IP 390 A %m Max 0.100 0.05
Aluminum + Silicon IP 470 mg/kg Max 60 <5
Sodium IP 470 mg/kg Max 100 2
Vanadium IP 470 mg/kg Max 350 3
Phosphorus IP 470 mg/kg Max 15 75
Zinc IP 470 mg/kg Max 15 9
Calcium IP 470 mg/kg Max 30 4
TEST METHOD UNIT RMG SPEC ISO 8217 - 10 RESULT
Ash Content ASTM D482 - 07 % m Max 0.100 0.005
Pour Point ASTM D87 - 11 °C Max 30 -21
Carbon Residue ASTM D180 -06 %m Max 18.0 3.39
Flash Point ASTM D93-12 °C Min 60 222
Density @ 15°C ASTM D4052 - 11 kg/l Max 0.991 1.028
Sulphur Content ASTM D4294 - 10 %m 4.42
Viscosity,Kinematic @ 50°C ASTM D445-12 mm2/s Max 380 1651
Water Content ASTM D95-05 % vol Max 0.50 0.15
Total Sediment Potential IP 390 A %m Max 0.100 0.02
Aluminum + Silicon IP 470 mg/kg Max 60 <5
Sodium IP 470 mg/kg Max 100 40
Vanadium IP 470 mg/kg Max 350 3
Phosphorus IP 470 mg/kg Max 15 <1
Zinc IP 470 mg/kg Max 15 <1
Calcium IP 470 mg/kg Max 30 <1